No IMU data
-
Hi everyone,
I am working with an rb5-flight and I have flashed the latest rb5 flight with voxl sdk.
I ran voxl-configure-mpa -p --family rb5-flight and all looked good.
I am able to see CPU data on the portal and via inspecting
However I am not able to see IMU data on the portal or inspecting with voxl-inspect-imu imu_p4
I have followed the various config commands and attempted to get the service running.
when running voxl-imu-server I am unable to find the IMU
Any suggestions on how to further debug the IMU and MPA?
Thank you!
-
Hi everyone,
I am working with an rb5-flight and I have flashed the latest rb5 flight with voxl sdk.
I ran voxl-configure-mpa -p --family rb5-flight and all looked good.
I am able to see CPU data on the portal and via inspecting
However I am not able to see IMU data on the portal or inspecting with voxl-inspect-imu imu_p4
I have followed the various config commands and attempted to get the service running.
when running voxl-imu-server I am unable to find the IMU
Any suggestions on how to further debug the IMU and MPA?
Thank you!
@Robby-Carff said in No IMU data:
I have follo
I have the same problem on VOXL2. When I connect the VOXL2 to QGroundControl I see that gyro/accel is missing and no data is coming in. Were you able to find the problem?
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login