VOXL2 PX4 1.11
-
Hello,
We have built and tested custom PX4 modules on the original VOXL hardware at PX4 version 1.11.
We have found that we can upgrade to 1.12 using the voxl-dev-1.12 branch, but for the sake of isolating problems, we would like to be able to build our 1.11 firmware for the VOXL2. I have tried to building with a few old branches that seem to have been never fully supported. Branches like v1.11.3-0.1.3-voxl2-rover. These seem to have strange features like the 1.12 EKF, however, and often do not compile without errors.
Is there some way we can build PX4 1.11 for the VOXL2 without too much effort? Or is it only reasonable for us to upgrade to 1.12?
Thank you
-
Hello,
We have built and tested custom PX4 modules on the original VOXL hardware at PX4 version 1.11.
We have found that we can upgrade to 1.12 using the voxl-dev-1.12 branch, but for the sake of isolating problems, we would like to be able to build our 1.11 firmware for the VOXL2. I have tried to building with a few old branches that seem to have been never fully supported. Branches like v1.11.3-0.1.3-voxl2-rover. These seem to have strange features like the 1.12 EKF, however, and often do not compile without errors.
Is there some way we can build PX4 1.11 for the VOXL2 without too much effort? Or is it only reasonable for us to upgrade to 1.12?
Thank you
@Veldrovive No, 1.11 is not supported and it would likely be a lot of effort to make it work.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login