VOXL2 PX4 1.11
-
Hello,
We have built and tested custom PX4 modules on the original VOXL hardware at PX4 version 1.11.
We have found that we can upgrade to 1.12 using the voxl-dev-1.12 branch, but for the sake of isolating problems, we would like to be able to build our 1.11 firmware for the VOXL2. I have tried to building with a few old branches that seem to have been never fully supported. Branches like v1.11.3-0.1.3-voxl2-rover. These seem to have strange features like the 1.12 EKF, however, and often do not compile without errors.
Is there some way we can build PX4 1.11 for the VOXL2 without too much effort? Or is it only reasonable for us to upgrade to 1.12?
Thank you
-
Hello,
We have built and tested custom PX4 modules on the original VOXL hardware at PX4 version 1.11.
We have found that we can upgrade to 1.12 using the voxl-dev-1.12 branch, but for the sake of isolating problems, we would like to be able to build our 1.11 firmware for the VOXL2. I have tried to building with a few old branches that seem to have been never fully supported. Branches like v1.11.3-0.1.3-voxl2-rover. These seem to have strange features like the 1.12 EKF, however, and often do not compile without errors.
Is there some way we can build PX4 1.11 for the VOXL2 without too much effort? Or is it only reasonable for us to upgrade to 1.12?
Thank you
@Veldrovive No, 1.11 is not supported and it would likely be a lot of effort to make it work.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login