m500 drone unable to find it on the wifi network
-
Hello,
I was trying to change the drone networking configuration from softAP mode to station mode and I think i successfully changed it but since I have done that It doesn't show up anymore and I can't connect to it. Can you tell me what I can do to reset it into softAP mode ? I was trying the hardware route. but I can't find the correct cable. If anyone can send me a good amazon link for a cable that works. or if any other way to reset the drone to default settings would be great or any other links to other posts that had the same problem or any resources from the documentation ? Anything would work.
Thank you
-
Hello,
I was trying to change the drone networking configuration from softAP mode to station mode and I think i successfully changed it but since I have done that It doesn't show up anymore and I can't connect to it. Can you tell me what I can do to reset it into softAP mode ? I was trying the hardware route. but I can't find the correct cable. If anyone can send me a good amazon link for a cable that works. or if any other way to reset the drone to default settings would be great or any other links to other posts that had the same problem or any resources from the documentation ? Anything would work.
Thank you
@Syed-Omair All you need to access the ADB shell is a micro usb cable
Page not found
ModalAI technical documentation for VOXL and VOXL 2 Companion Computers for PX4 and ArduPilot Obstacle Avoidance and GPS-denied navigation, assembled in the USA
ModalAI Technical Docs (docs.modalai.com)
-
@Syed-Omair All you need to access the ADB shell is a micro usb cable
Page not found
ModalAI technical documentation for VOXL and VOXL 2 Companion Computers for PX4 and ArduPilot Obstacle Avoidance and GPS-denied navigation, assembled in the USA
ModalAI Technical Docs (docs.modalai.com)
-
@tom Thank you for the quick reply
this is the cable right ? I am trying and I don't know where it will fit on the voxl board.
thanks
@Syed-Omair This image here: https://docs.modalai.com/images/m500/vehicle-overview-right-144-1024.jpg
shows where to look for the connector on m500, labeled "USB for VOXL (Under)"
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login