@Eric-Katzfey The main cause was system image version. The internet problem has solved!
now i'll try again the QGC setup.
Thanks a lot.
Posts made by znn
-
RE: ekf2 problem
-
RE: ekf2 problem
@Eric-Katzfey Thanks, but i've been tried with station mode so far. I'll check again.
I think the RX part in wlan0 should not be zero, right?
Thank you for the reply.
-
RE: ekf2 problem
@modaltb I think the basic problem is on the internet.
I tried
- opkg install voxl-suite
and I got opkg_download_backend fail error
and with the following command
- ping www.modalai.com
the error comes up.
Is the ekf2 problem related to this internet problem?
In some forum pages, the microhard radio has to be disable but i'm not using microhard.
Is there something i can do?Here some additional info about VOXL.
-
RE: ekf2 problem
@modaltb From PX4 mainline.
I used Qgroundcontrol and select the current stable release. -
ekf2 problem
Hi, I have an error with ekf2.
The local position data status is invalid.
I'm using PX4 version 1.11.
Does modified library with changes is necessary?