Hi @RykerBarthold
That USB-C follows the pinout you can get from the device spec.
We list the MPN of the connector here: https://docs.modalai.com/voxl2-mini-connectors/#summary
I must caution that you need to plan on failure here. That connector will take a lot of heat to remove and you risk damaging a lot of the surrounding components.
We will obviously not be able to offer any RMA or credit for boards that have been through this potential process.
@RykerBarthold Yes, that's our long flex cable and will work. Be sure to pay attention to pin1 locations and please review the software pages on our Technical Docs to help you along with the camera setup.