@Moderator Understood. I saw in another post they mentioned how there may not be firmware support for the OV9782 sensor on the VOXL2 Mini. Is that correct with the above layout?
Additionally, the other option I saw is M0014 with the OV7251 sensor which should connect directly to the M0076. Again is this correct and is there firmware support for it?
Thank you
Hi, I am looking to connect a M0113 Camera to a VOXL2 Mini.
The solution I was able to come to is that I could use the M0008 cable to the camera and the M0076 interposer to connect between the VOXL2 Mini and the cable. Is that correct?
And are there any more direct options? Like direct cable or interposer between VOXL2 Mini and camera?
Thank you,
Ryker
Hi, I am looking into removing the USB C connector on the VOXL 2 Mini for packaging constraints. I am wondering if I could get my hands on the pin-out of the connector's pads? Much appreciated!
Hi, am I wondering if there is any way to connect eight MSU-M0113 cameras to a VOXL2 Mini? I know that this may be a big ask but I figured I would ask here before digging through some combination of dual camera adaptor and stereo camera cables that would allow for this at least physically. Thank you!
Understood. Just to double check this Cable should work correct?
Thank you!
Hi all,
I currently am wanting to connect this camera to the VOXL2 Mini directly.
I have found this cable and I want to just check to make sure that it will work directly between camera and processor.
Thats all and thank you,
Ryker