setting up voxl-portal
-
I have VOXL Flight and I just finished the VOXL Quickstart documentation. It is in station mode and is connected to a working network. I have enabled voxl-camera-server, voxl-cpu-monitor, voxl-imu-server, voxl-qvio-server, voxl-tflite-server and voxl-vision-px4 using
voxl-configure-mpa --wizard. I ranopkg updateandopkg install voxl-portalwhich installed voxl-portal. I then ranadb shell voxl-portalwhich gave me the following output:2022-01-09 20:36:54 2 mongoose.c:3317:mg_listen 1 accepting on http://0.0.0.0:80 (port 80). What is the next step to see the portal? -
Once you have voxl-portal started either via the command line or as a service, you can access the webserver on a device within the same network just by navigating to your voxl's IP address.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login