setting up voxl-portal
-
I have VOXL Flight and I just finished the VOXL Quickstart documentation. It is in station mode and is connected to a working network. I have enabled voxl-camera-server, voxl-cpu-monitor, voxl-imu-server, voxl-qvio-server, voxl-tflite-server and voxl-vision-px4 using
voxl-configure-mpa --wizard. I ranopkg updateandopkg install voxl-portalwhich installed voxl-portal. I then ranadb shell voxl-portalwhich gave me the following output:2022-01-09 20:36:54 2 mongoose.c:3317:mg_listen 1 accepting on http://0.0.0.0:80 (port 80). What is the next step to see the portal? -
Once you have voxl-portal started either via the command line or as a service, you can access the webserver on a device within the same network just by navigating to your voxl's IP address.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login