Fail : Connect QGroundControl to VOXL using WiFi
I have already setup the ip address according to the website, but still fail to connect.
QGC always show waiting for vehicle connection.
/home/rvl/Pictures/Screenshot from 2021-12-28 14-23-55.jpg
Can you please log in to the voxl, run the following commands, and share the output?
after one day, when I go back to lab, it is connected. It seems ok now.
But I would like to know, which service should be turn on?
Those services look correct. voxl-vision-px4 is the main service that would be routing MAVLink packets from a network interface into the flight controller