3D model for stinger camera mount repair
-
Hardware: (board / drone / SKU, serial # if you have it) VOXL STINGER VISION MRB-D0013-6-V1-C33-T8-M26-X0
Software version: (paste the output of
voxl-version) 1.8.0What I am trying to do:
Repair camera mount. The plastic piece that sits on the metal frame has a broken sidings and broken center screw hole. Requesting 3d model file design compatible with 3d printing.Logs / pictures:
-
Hi @alex-z-1 Here is the STEP for the front tracking mount: https://storage.googleapis.com/modalai_public/modal_drawings/D0013_Front Tracking Mount.step
Note this is the V1 plastic. The V1 Stinger has been EOL for some time, so this came out of archived CAD rather than a current release.
One observation from your photos: the film is still on the battery pad. That likely contributed to the battery stop breaking, though it would not have saved the camera housing.
Let us know if this helps!
-
Hi @alex-z-1 Here is the STEP for the front tracking mount: https://storage.googleapis.com/modalai_public/modal_drawings/D0013_Front Tracking Mount.step
Note this is the V1 plastic. The V1 Stinger has been EOL for some time, so this came out of archived CAD rather than a current release.
One observation from your photos: the film is still on the battery pad. That likely contributed to the battery stop breaking, though it would not have saved the camera housing.
Let us know if this helps!
-
V Vinny has marked this topic as solved
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login