Help needed: what connector is used between the Modal AI PX4 battery and supplied charger?
-
Hello Modal AI / Forum Team,
I recently purchased the PX4 Autonomy Developer Kit (Modal AI VOXL), including the battery and charger you supplied. However, I am unable to connect the charger to the battery — the plugs don’t seem to match.
Starling 2 Max GPS-denied Development Drone
Product Specifications The Starling 2 Max is VOXL 2-powered, NDAA-compliant development drone supercharged by VOXL SDK specifically designed for computer vision-based, long-range dead reckoning with a 500g payload capacity. Powered by Blue UAS Framework autopilot, VOXL 2, the Starling 2 Max weighs 500g and boasts an im
ModalAI, Inc. (www.modalai.com)
Battery provided by Modal AI: [GNB Power Li-ion 3000, 2S1P, 7.4V, 22.2 WH]
Charger provided by Modal AI.
Could you please help me with the following:
How do I connect the charger and battery?
Do I need an adapter or extra cable assembly/connector to mate the charger and battery? If so, what is that part name, and where can I obtain it?
Any photos of the intended connection (battery side, charger side) would help me verify what I have vs what is required.
I greatly appreciate your help, as I’m eager to get things up and running without damaging components.
Thanks in advance,
Mamun -
Hello Modal AI / Forum Team,
I recently purchased the PX4 Autonomy Developer Kit (Modal AI VOXL), including the battery and charger you supplied. However, I am unable to connect the charger to the battery — the plugs don’t seem to match.
Starling 2 Max GPS-denied Development Drone
Product Specifications The Starling 2 Max is VOXL 2-powered, NDAA-compliant development drone supercharged by VOXL SDK specifically designed for computer vision-based, long-range dead reckoning with a 500g payload capacity. Powered by Blue UAS Framework autopilot, VOXL 2, the Starling 2 Max weighs 500g and boasts an im
ModalAI, Inc. (www.modalai.com)
Battery provided by Modal AI: [GNB Power Li-ion 3000, 2S1P, 7.4V, 22.2 WH]
Charger provided by Modal AI.
Could you please help me with the following:
How do I connect the charger and battery?
Do I need an adapter or extra cable assembly/connector to mate the charger and battery? If so, what is that part name, and where can I obtain it?
Any photos of the intended connection (battery side, charger side) would help me verify what I have vs what is required.
I greatly appreciate your help, as I’m eager to get things up and running without damaging components.
Thanks in advance,
Mamun@mamuncanada That wall power is for powering the drone for desktop development, NOT for charging batteries. Do not attempt to do so.
-
@mamuncanada That wall power is for powering the drone for desktop development, NOT for charging batteries. Do not attempt to do so.
@tom Thank you very much for your information.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login