Mini ESC with Motor spin problems
-
Hi Team,
I've bought 2 voxl mini ecs, but both have issue spinning up a motor connected on port 0. It seems to be stuck in the synchronisation phase when motor ist jumping back and forth.
However the motor works fine on every other port. I also used the script to set params to the esc and the spin script to check. Also tested with different firmware versions of the voxl2-mini computer with no change.Any idea what the issue could be ?
Thanks in advance
Phil
-
Hi Team,
I've bought 2 voxl mini ecs, but both have issue spinning up a motor connected on port 0. It seems to be stuck in the synchronisation phase when motor ist jumping back and forth.
However the motor works fine on every other port. I also used the script to set params to the esc and the spin script to check. Also tested with different firmware versions of the voxl2-mini computer with no change.Any idea what the issue could be ?
Thanks in advance
Phil
@astro_phil can you please share a video of the issue and the esc params that you are using?
Thanks!
Alex
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login