Microhard PMDDL with Voxl2 mini... need help
-
We are using Voxl2 mini with PMDDL2450 and able to setup hires small (640x480) with a bit rate under 1.5 mbps. PMDDL handles this well enough in 4 MHz (Channel Bandwidth) + 3000 m (Distance) settings on the PMDDL.
- Despite setting both TX & Rx to 1+2 antenna channels the radio wouldn't enter into MIMO mode if you select any specific modulation method. It switches in and out of MIMO mode only if you select AUTO for modulation setting.
My question is... How to enforce MIMO mode for a specific modulation choice, like BPSK 1/2.
-
We are using Voxl2 mini with PMDDL2450 and able to setup hires small (640x480) with a bit rate under 1.5 mbps. PMDDL handles this well enough in 4 MHz (Channel Bandwidth) + 3000 m (Distance) settings on the PMDDL.
- Despite setting both TX & Rx to 1+2 antenna channels the radio wouldn't enter into MIMO mode if you select any specific modulation method. It switches in and out of MIMO mode only if you select AUTO for modulation setting.
My question is... How to enforce MIMO mode for a specific modulation choice, like BPSK 1/2.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login