Using a aftermarket Power Module for the Flight Core V2
-
Hi, I just had a question on using an aftermarket power module being that the one that came with my flight core v2 stopped working.
The After Market pin layout:
-5v
-5v
-Vcurrent
-Vbatt
-GND
-GNDThe Flight Core V2 calls for:
-5V
-GND
-I2C3_SCL
-I2C3_SDAWhere can I put the Vcurrent and Vbatt wires to have the flight controller still read the power consumption and voltage?
-
Hi, I just had a question on using an aftermarket power module being that the one that came with my flight core v2 stopped working.
The After Market pin layout:
-5v
-5v
-Vcurrent
-Vbatt
-GND
-GNDThe Flight Core V2 calls for:
-5V
-GND
-I2C3_SCL
-I2C3_SDAWhere can I put the Vcurrent and Vbatt wires to have the flight controller still read the power consumption and voltage?
-
@lccarter it doesn't look like your aftermarket power module supports voltage and current monitoring in the same way as ours does. Our APM has an i2c voltage and current monitor built in.
@Moderator thank you I appreciate it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login