Stand Alone Modem Board Connectivity Issues
-
I ordered several Stand Alone Modem boards to set up several radio pairs. Most of them work properly and had no issues with setup.
One Stand Alone Modem seems to be stuck in a "boot" state. The board is detected by the PC but the modem is unable to be reached.
I tried swapping to a new pMDDL microhard and the same issue occurred.
The CPU LED on the board seems to flash irregularly.
Is there a way to "re-flash" the Stand Alone Modem Board or is there something else I could try?
-
I ordered several Stand Alone Modem boards to set up several radio pairs. Most of them work properly and had no issues with setup.
One Stand Alone Modem seems to be stuck in a "boot" state. The board is detected by the PC but the modem is unable to be reached.
I tried swapping to a new pMDDL microhard and the same issue occurred.
The CPU LED on the board seems to flash irregularly.
Is there a way to "re-flash" the Stand Alone Modem Board or is there something else I could try?
@swickliff please submit a request at https://modalai.com/rma .
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login