OV9782 camera

Sonoaero

What is the PN of the interposer required to connect the M0113 OV9782 camera to the VOXL mini

Moderator

Please see this doc for supported configurations https://docs.modalai.com/voxl2-camera-configs/

Sonoaero

All those configuration seems to be dual sensor cabling. Can I use the M0008 cable (24 pin camera flex to 36 pin) and the M0076 interposer on J6/J7 of the VOXL2 mini?

Vinny

Hi @Sonoaero
That is a valid electrical connection scheme.
If you plug into either J6 or J7 of V2 Mini, you'll match the configuration shown here:
https://docs.modalai.com/voxl2-mini-image-sensors/#tracking
Keeping in mind M0076 only picks up the "lower" CSI group functions.

I cannot advise as to how SW will work on this config switching from M0014 (OV7251) to M0113 (OV9782), but it is valid electrically.

Hope this helps.
Thanks!