OV9782 camera
-
Please see this doc for supported configurations https://docs.modalai.com/voxl2-camera-configs/
-
Please see this doc for supported configurations https://docs.modalai.com/voxl2-camera-configs/
-
All those configuration seems to be dual sensor cabling. Can I use the M0008 cable (24 pin camera flex to 36 pin) and the M0076 interposer on J6/J7 of the VOXL2 mini?
Hi @Sonoaero
That is a valid electrical connection scheme.
If you plug into either J6 or J7 of V2 Mini, you'll match the configuration shown here:
https://docs.modalai.com/voxl2-mini-image-sensors/#tracking
Keeping in mind M0076 only picks up the "lower" CSI group functions.I cannot advise as to how SW will work on this config switching from M0014 (OV7251) to M0113 (OV9782), but it is valid electrically.
Hope this helps.
Thanks!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login