Trouble connecting to QGC & VOXL

rpendharkar

Dear Team,

Trying to use the flight core v2 with the VOXL and I am encountering the following problems

Unable to connect to QGC over telemetry (I am using mRO radios) over either of the two ports J1 & J5. J1 worked suddenly after a few hours but it is still not working on the other v2 flight core I have
The VOXL is not talking to the flight core v2. I am using ports J12, J11 and J10 on the VOXL and J1 and J5 on the flight core v2. I tried changing the values for px4_uart_bus in mavlink-server-conf file to match the connectors on the VOXL, but v2 still does not talk to v2. However the same VOXL is talking to flight core v1. Is there some parameter that needs to be changed?

Thanks

Moderator