PX4 modal_io: esc_status not updating
-
Hi,
The below is my setup:
Model - 4in1 micro esc m0129
Firmware - 39, hash fb6fd95
Bootloader - 184, hash 10bf24c8modal_io.cpp
parse_response()
qc_esc_packet_process_char() - returns ESC_ERROR_BAD_HEADERI was wondering if there is a interface control document available for devs? Also has the byte communication changed in this version of ESC firmware?
Thanks!
-
Hi,
The below is my setup:
Model - 4in1 micro esc m0129
Firmware - 39, hash fb6fd95
Bootloader - 184, hash 10bf24c8modal_io.cpp
parse_response()
qc_esc_packet_process_char() - returns ESC_ERROR_BAD_HEADERI was wondering if there is a interface control document available for devs? Also has the byte communication changed in this version of ESC firmware?
Thanks!
Update:
It was an issue on my end regarding the baud-rate configuration.
All is good.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login