How would I change the area that lidar is capturing?
-
Good afternoon,
I have a drone that I am testing, but the position of the lidar cam causes the props to interfere with it. Is there an easy way on the VOXL2 to reconfigure the lidar so that it excludes an area on the top?
I was doing some digging and could not figure out if there was a way to do this.
As a note, I am on platform 1.0.0
Thank you,
John Nomikos.
-
Good afternoon,
I have a drone that I am testing, but the position of the lidar cam causes the props to interfere with it. Is there an easy way on the VOXL2 to reconfigure the lidar so that it excludes an area on the top?
I was doing some digging and could not figure out if there was a way to do this.
As a note, I am on platform 1.0.0
Thank you,
John Nomikos.
@John-Nomikos-0 No, you will need to ignore that portion of the data in your code making use of the data.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login