How would I change the area that lidar is capturing?
-
Good afternoon,
I have a drone that I am testing, but the position of the lidar cam causes the props to interfere with it. Is there an easy way on the VOXL2 to reconfigure the lidar so that it excludes an area on the top?
I was doing some digging and could not figure out if there was a way to do this.
As a note, I am on platform 1.0.0
Thank you,
John Nomikos.
-
Good afternoon,
I have a drone that I am testing, but the position of the lidar cam causes the props to interfere with it. Is there an easy way on the VOXL2 to reconfigure the lidar so that it excludes an area on the top?
I was doing some digging and could not figure out if there was a way to do this.
As a note, I am on platform 1.0.0
Thank you,
John Nomikos.
@John-Nomikos-0 No, you will need to ignore that portion of the data in your code making use of the data.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login