can't connect m500 drone to qgroundcontrol

[Syed Omair]

I have seen multiple posts on this forum with the same issue and tried multiple solutions but none of them seem to work

some of the things I have tried.

• changing sdk versions (tldr: upgraded from 0.9.4 -> 0.9.5, it wasn't working.)
  voxl upgrade guide
  "connected to voxl-mavlink-server but no messages from PX4"

• checked and "external_fc" is false
  "Connected to voxl-mavlink-server but no messages from PX4" again

• tried monitoring if mavlink is sending messages. and nothing works.
  mavlink monitoring
  

• something that is potentially interesting. this down here wasn't the case before.
  
  below is the output to voxl-qvio-server
  

• followed this guide.
  Connect m500 to PX4

• checked for loose connections. unplugged and plugged everything back in
  loose connection

• I want to try this solution but I can't get a wired connection to qgroundcontrol. any help with that would be appreciated
  wired connection to qgc solution

Thank you for your time and help,
Omair

[Syed Omair]

This post is deleted!

[Syed Omair]

for anyone who has the voxl-qvio issue where it says state FAIL, just try centering (using your fingers and wiggling) the voxl board and it will work. I think it just needs to be centered.