USB camera UVC service something is missing
-
We are trying to connect a arducam to the VOXL and stream that via Ethernet to QGC.
We are trying to that the same way as in this video: https://www.youtube.com/watch?v=iStAaxOtMLw
But then only with one camera, so we thought it would be simple.But when trying those commands like:
-> voxl-uvc-server -v 0c45 -t (custom pipe)
-> voxl-uvc-server -sIt does not work, because we apparently use an older version.
But we have updated it to: 0.1.2. Did the pkg-manager dev etc. etc. and still it is giving us not more commands. (see image)
So a couple of questions:
- Is this the right route to go to enable a stream for only one UVC USB camera?
- And how can we get these commands?
-
We are trying to connect a arducam to the VOXL and stream that via Ethernet to QGC.
We are trying to that the same way as in this video: https://www.youtube.com/watch?v=iStAaxOtMLw
But then only with one camera, so we thought it would be simple.But when trying those commands like:
-> voxl-uvc-server -v 0c45 -t (custom pipe)
-> voxl-uvc-server -sIt does not work, because we apparently use an older version.
But we have updated it to: 0.1.2. Did the pkg-manager dev etc. etc. and still it is giving us not more commands. (see image)So a couple of questions:
- Is this the right route to go to enable a stream for only one UVC USB camera?
- And how can we get these commands?
@Sem-Andeweg We're taking a look. I think the "t:" is missing from https://gitlab.com/voxl-public/voxl-sdk/services/voxl-uvc-server/-/blob/dev/src/main.c#L224
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login