Level horizon calibration failed on voxl2
-
I am having this error while doing level horizon calibration with voxl2 with QGC.
[cal] calibration started: 2 level attitude estimator not running - check system boot ... [cal] calibration failed: levelI am using voxl-px4_1.4.28-202209292009 package. How to fix this ?
-
I am having this error while doing level horizon calibration with voxl2 with QGC.
[cal] calibration started: 2 level attitude estimator not running - check system boot ... [cal] calibration failed: levelI am using voxl-px4_1.4.28-202209292009 package. How to fix this ?
-
Do you have a magnetometer connected? If not try this:
On my setup, I removed my compass, and if I didn't set this to
nonethen I get the same error, but after setting tononeI'm OK:[cal] calibration started: 2 level [cal] calibration done: level -
Do you have a magnetometer connected? If not try this:
On my setup, I removed my compass, and if I didn't set this to
nonethen I get the same error, but after setting tononeI'm OK:[cal] calibration started: 2 level [cal] calibration done: level
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login