IMX377 M12 Connection on VOXL Flight

tangotoo · 1 Sept 2022, 15:35

Just wanted to confirm, when connecting the IMX377 M12 , the ribbon will be towards the Flight Core portion of the board vs away. Based on the board #1 location near the J2 silk and the #1 on the FPC ribbon I believe this is correct, but it deviates from the other 4k sensor shown on the documentation page.

Is this correct?

Adrian Hidalgo · 1 Sept 2022, 17:26

The IMX377 should be plugged as shown:

tangotoo · 1 Sept 2022, 17:57

Perfect thank you! I have the sensor up and running.