MAVLink Odometry X Y value 0

Kris

@Chad-Sweet @Adrian-Hidalgo ,
For PX4 confirmation, here is my voxl vision status.

voxl:~$ systemctl status voxl-vision-px4 -l
● voxl-vision-px4.service - voxl-vision-px4
   Loaded: loaded (/usr/bin/voxl-vision-px4; enabled; vendor preset: enabled)
   Active: active (running) since Thu 1970-01-01 00:00:06 UTC; 52 years 8 months ago
 Main PID: 2073 (voxl-vision-px4)
   CGroup: /system.slice/voxl-vision-px4.service
           └─2073 /usr/bin/voxl-vision-px4

Sep 02 16:25:57 apq8096 voxl-vision-px4[2073]: ERROR validating VIO data received through pipe: read partial packet
Sep 02 16:25:57 apq8096 voxl-vision-px4[2073]: read 156 bytes, but it should be a multiple of 324
Sep 02 16:25:57 apq8096 voxl-vision-px4[2073]: ERROR validating VIO data received through pipe: read partial packet
Sep 02 16:25:57 apq8096 voxl-vision-px4[2073]: read 156 bytes, but it should be a multiple of 324
Sep 02 16:25:57 apq8096 voxl-vision-px4[2073]: ERROR validating VIO data received through pipe: read partial packet
Sep 02 16:25:57 apq8096 voxl-vision-px4[2073]: read 156 bytes, but it should be a multiple of 324
Sep 02 16:25:57 apq8096 voxl-vision-px4[2073]: ERROR validating VIO data received through pipe: read partial packet
Sep 02 16:25:57 apq8096 voxl-vision-px4[2073]: read 156 bytes, but it should be a multiple of 324
Sep 02 16:25:57 apq8096 voxl-vision-px4[2073]: ERROR validating VIO data received through pipe: read partial packet
Sep 02 16:25:57 apq8096 voxl-vision-px4[2073]: read 156 bytes, but it should be a multiple of 324
voxl:~$

Could this be a time/clock, or a watchdog timer issue?

Active: active (running) since Thu 1970-01-01 00:00:06 UTC; 52 years 8 months ago

James Strawson

Hi Kris

It looks like the voxl-vision-px4 and voxl-qvio-server versions have gotten out of sync, likely voxl-vision-px4 has been updated but voxl-qvio-server was not.

Do you mind proving the output from the following 3 commands so I can check the state of the opkg package manager

cat /etc/opkg/opkg.conf 
opkg info voxl-vision-px4
opkg info voxl-qvio-server

Thanks,
James

Kris

Hi @James-Strawson , thank you. Here are the outputs you have requested.

################################################################
## This file has been automatically generated.
## Please use voxl-configure-opkg to modify it.
################################################################
dest root /
option lists_dir /var/lib/opkg/lists
arch all 1
arch arm64 7

src/gz modalai http://voxl-packages.modalai.com/dists/apq8096/stable/binary-arm64/

voxl:~$ opkg info voxl-vision-px4
Package: voxl-vision-px4
Version: 1.2.0
Depends: librc-math, libmodal-pipe (>= 2.4.0), libmodal-json, voxl-mpa-tools (>= 0.2.5), voxl-mavlink-server, libmodal-cv (>= 0.1.0)
Status: install user installed
Section: base
Architecture: arm64
Maintainer: James Strawson <james@modalai.com>
MD5Sum: 4bcff955596c2a5964d68cacf60d08a8
Size: 106864
Filename: voxl-vision-px4_1.2.0.ipk
Description: Interface between VOXL's computer vision services and PX4
Installed-Time: 1661276328

voxl:~$ opkg info voxl-qvio-server
Package: voxl-qvio-server
Version: 0.7.1
Depends: libmodal-pipe (>= 2.4.0), libmodal-json (>= 0.4.0), voxl-mpa-tools (>= 0.7.0)
Status: unknown ok not-installed
Section: base
Architecture: arm64
Maintainer: james@modalai.com
MD5Sum: 2ccb793c2d7059217d9d32b54564352b
Size: 55416
Filename: voxl-qvio-server_0.7.1.ipk
Description: publishes QVIO data over named pipe interface

Package: voxl-qvio-server
Version: 0.4.6
Depends: libmodal-pipe (>= 2.0.0), libmodal-json (>= 0.4.0), voxl-mpa-tools
Status: install ok installed
Architecture: arm64
Installed-Time: 6815

qvio-server version 0.7.1 status: unknown ok not-installed

voxl:~$ opkg list-installed | grep "libmodal"
libmodal-cv - 0.1.0
libmodal-exposure - 0.0.7
libmodal-json - 0.4.2
libmodal-pipe - 2.4.0

James Strawson

Yes, It seems your installed voxl-vision-px4 and libmodal_pipe versions are from SDK 0.8 wheras your voxl-qvio-server is from SDK 0.7, that is the source of the mismatch.

You can upgrade qvio server with opkg install voxl-qvio-server to fix the mismatch quickly but I would recommend just flashing back to the SDK 0.7 platform release since SDK 0.8 does not support TOF on VOXL1. The platform releases are tested as a whole an include a set of packages all known to work together. When individual packages get upgraded instead of the whole SDK together then things tend to break.

Kris

@James-Strawson
Thank you, I will try this

Kris

@James-Strawson could you please help me with flashing back to SDK 0.7 or provide a link explaining how to flash back to a lower SDK?
This can be done over ssh right? Or do I need to ADB into voxl?

James Strawson

Instructions here: https://docs.modalai.com/flash-system-image/

The latest platform release for voxl1 is voxl_platform_3.8.0-0.7.tar available for download here https://developer.modalai.com/asset/1

Kris

@James-Strawson oh ok, now I remember
Cheers mate!

Kris

@Chad-Sweet @Adrian-Hidalgo @James-Strawson
Everything is working now! THANK YOU so much for all your help!!!

Kris

This post is deleted!

Kris

This post is deleted!

Kris

This post is deleted!

Kris

This post is deleted!