Error in sending trajectory to voxl-vision-px4
-
hi,
I was trying out voxl-mapper ,when It generates the paths and sends , voxl-vision-px4 throws the following error
ERROR validating trajectory data received through pipe: read partial packet
I tried updating voxl-mapper to v0.0.5 but still no luck , how can I solve this error? -
Hi,
Could you please post the output of the following command?
voxl-inspect-services -v -
Currently I am not in the office, but I remember that the version of voxl mapper was 0.0.5. What could possibly be causing this error? Do I need to update anything?
Thank you@howard I need the version of voxl-vision-px4 as well to determine the problem
-
So the issue is a mismatch in the data structures used to send the trajectory data. The structures were fixed in voxl-mapper v0.0.5 and voxl-vision-px4 >= v1.0.0.
So you're best bet is to upgrade voxl-vision-px4 which is only currently available on dev
-
So the issue is a mismatch in the data structures used to send the trajectory data. The structures were fixed in voxl-mapper v0.0.5 and voxl-vision-px4 >= v1.0.0.
So you're best bet is to upgrade voxl-vision-px4 which is only currently available on dev
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login