Pi or Jetson companion computer installation and interfacing step-by-step
-
-
How do I connect a companion computer to a VOXL 2 dev drone? Do you have any step-by-step instructions with pictures? The companion computers I want to connect will most likely be running Ubuntu or Raspbian on any version of Pi or Jetson.
-
Where can I find example code (python or otherwise) that will allow me to run code on a companion computer and control or interface with the VOXL 2 features? I also want to get the camera feeds and process them on the companion computer.
-
-
VOXL 2 has a lot more computing power than both of those and runs Linux. Can you just run your software on VOXL 2?
-
OK. We don't have a documented way, but VOXL 2 is a Linux computer. So you could use some form of networking: ROS or other. There are also UARTs, etc
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login