• Categories
  • Recent
  • Tags
  • Popular
  • Users
  • Groups
  • Register
  • Login
ModalAI Forum
  • Categories
  • Recent
  • Tags
  • Popular
  • Users
  • Groups
    • Register
    • Login

    The angle of the tracking camera mount on m500

    VOXL m500 Reference Drone
    2
    6
    451
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Y
      yu zhang
      last edited by 26 Apr 2022, 01:57

      Hi team,
      I am wondering what is the angle of the tracking camera mount on m500?
      https://www.modalai.com/products/tracking-image-sensor-mount

      I roughly measured it for a 35 degree, and I am not sure if there is an error.

      Also, I am wondering why it is designed for such a specific angle downward? Is it required by the VIO algorithm? Or is it a tested result for a better VIO tracking performance? What if changing the angle, will the VIO be impacted?

      Thanks.

      1 Reply Last reply Reply Quote 0
      • ?
        A Former User
        last edited by 26 Apr 2022, 20:59

        The angle is 45 degrees, this was to give VIO a good view of the ground while also not being completely obscured when landed. You can freely change the angle/position of the camera but you will need to update /etc/modalai/extrinsics.conf appropriately

        Y 2 Replies Last reply 27 Apr 2022, 03:33 Reply Quote 0
        • Y
          yu zhang @Guest
          last edited by 27 Apr 2022, 03:33

          @Alex-Gardner Thanks so much for the information! And I will have a look at the configuration file.

          1 Reply Last reply Reply Quote 0
          • Y
            yu zhang @Guest
            last edited by 10 May 2022, 07:19

            Hi @Alex-Gardner, I also have a couple of questions about the calibration after changing those configuration files.

            For example, if I would change the angle in /etc/modalai/extrinsics.conf, I should have to calibrate the camera after this, right?

            This link shows a process of using voxl-calibrate-camera to calibrate ethier tracking camera or stereo. https://docs.modalai.com/calibrate-cameras/

            Since it uses a printed black/white grid paper in the calibration, I am wondering do you have a copy of this grid to download and print as a standard tool?

            Also, I noticed VOXL uses 1kHz IMU as default sampling rate, what if I would change the IMU's rate, should I have to calibrate it following this link https://docs.modalai.com/calibrate-imu/ too, right?

            And I am wondering if changing the IMU's rate could impact the fusion process for VIO? Or simply make a IMU calibration after that is all right to VIO?

            1 Reply Last reply Reply Quote 0
            • ?
              A Former User
              last edited by 10 May 2022, 19:56

              The intrinsics of the camera won't change when you move the camera, so you wouldn't have to recalibrate the tracking camera if you move it, and you would only have to recalibrate the stereo extrinsics if you moved those.

              The imu won't require a recalibration if you change the sample rate.

              Changing the sample rate may impact VIO performance if you change it a significant amount, but you won't need to change any configuration for VIO.

              Y 1 Reply Last reply 11 May 2022, 01:52 Reply Quote 0
              • Y
                yu zhang @Guest
                last edited by 11 May 2022, 01:52

                @Alex-Gardner All right, thanks so much for double-checking 😉

                1 Reply Last reply Reply Quote 0
                • First post
                  Last post
                Powered by NodeBB | Contributors