Starling 2 max not booting
-
Hi,
We have bought 4 units of starling 2 max - C28.
2 units booted fine and we are working with them on daily basis.
3rd unit booted succefully. After connecting adb shell and configuring wifi station 5Ghz everything was working fine.
using voxl-portal I tested all 4 cameras. after a while I notices wifi connection is gone.
later I have made a power cycle by disconnecting and connecting battery. the beep sound and the 3 blue leds are blinking as always.
it seems the system is not loading. the usb adb connection is not discorevable anymore in the host machine.
what can be done in such a state ?BR,
Roy
-
Hello @RoyAzriel,
There are 4 blue LEDs on the ESC - is that what you are referring when you said "the 3 blue leds are blinking as always" ?
I am not sure what happened, but you should try the unbricking procedure for voxl2: https://docs.modalai.com/voxl2-unbricking/
Alex
-
@RoyAzriel
Hi Alex,
I have done the full procedure of unbricking. everything went well and the system was flashed with image M0054(154)-2.zip downloaded from you developer site.
After switching back SW2 to edl off and restarting the device wont enumerate the usb.
for a minute after booting again I was able to see:
Bus 003 Device 027: ID 18d1:d00d Google Inc. Xiaomi Mi/Redmi 2 (fastboot)
I think this unit is faulty. ABL is not succeding to boot slot A.how can we do RMA ?
BR,
Roy
-
Sorry to hear that.
https://www.modalai.com/pages/rma
You can provide a link to this post when you submit it.
