Camera status when voxl-camera-server is not running
-
Hi!
I was wondering if the cameras and interposer board remain powered on but on standby or if they are entirely powered off when the
voxl-camera-serveris not running.Thanks!
@SKA ,
Most of the supported cameras (except for Boson, Hadron) have their reset signal connected to VOXL2, so when the cameras are not in use, they are shut down via the reset pin. This means that the camera modules may still get power, but they are shut down.
There are many power rails and interposers - some power rails remain on all the time (5.0, 3.8V) and others may be shut down by PMIC when not in use. Different cameras use different power rails for their operation, so it is hard to answer this question without knowing the specific use case.
Alex
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login