MAG SDA 3P3V shorted to ground
-
Been working with the VOXL2 Mini for awhile, communicating with I2C devices using QUP0 on J19. Today ran into an issue of communication and I2C probing failing, finally figured it out to be my SDA line being shorted by the VOXL. I tried different cables, different I2C devices and a seperate VOXL2 Mini, all of them had the SDA line shorted on one mini, and pulled high as is proper on the other.
I see no visible damage on the voxl2 mini and nothing has happened that could've caused this. Any information would be greatly appreciated, specially as if this mini cant use that I2C bus anymore it is useless for our purposes.
Cheers
Carson -
Been working with the VOXL2 Mini for awhile, communicating with I2C devices using QUP0 on J19. Today ran into an issue of communication and I2C probing failing, finally figured it out to be my SDA line being shorted by the VOXL. I tried different cables, different I2C devices and a seperate VOXL2 Mini, all of them had the SDA line shorted on one mini, and pulled high as is proper on the other.
I see no visible damage on the voxl2 mini and nothing has happened that could've caused this. Any information would be greatly appreciated, specially as if this mini cant use that I2C bus anymore it is useless for our purposes.
Cheers
Carson -
@cbay Reflashing seems to have fixed it, so it isnt a hardware problem and is instead a firmware issue. I am loading custom drivers into voxl-px4, any clue how that can affect it
-
@cbay This may be a stretch but I do think it has something to do with the difference between voxl-fpv-px4 and voxl-px4. Can someone explain the differences between them
@cbay voxl-fpv-px4 is based on voxl-px4 but has some custom tuning code / parameters for our fpv drones that isn't in voxl-px4. So, it's kind of a superset. But there isn't anything related to low level i2c drivers so I have no idea how that could be causing this issue.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login