Recovering Flight Logs from a Bricked VOXL2
-
Hi all,
I'm attempting to recover the last flight logs from a VOXL 2 that suffered a crash. The VOXL 2 appears to power on normally (LEDs light up, board shows no visible damage), but it will not allow me to connect via ADB, SSH, or fastboot.
When connected to a PC, the device shows up as: Qualcomm HS-USB QDLoader 9008, so EDL.
My goal:
I'm trying to recover flight logs from the onboard UFS storage before re-flashing the system image.What I've tried:
- Installed Qualcomm USB drivers to recognize Qualcomm HS-USB QDLoader 9008 as COM5
- Installed QPST/QFIL 2.7.460 (digitally signed Qualcomm build)
- Tried accessing partitions via QFIL's Partition Manager using various prog_firehose_ddr.elf files
Every attempt so far results in:
ERROR: function: sahara_rx_data: Unable to read packet header. Only read 0 bytes. ERROR: function: sahara_main: Sahara protocol error ERROR: function: main: Uploading Image using Sahara protocol failed Download Fail: Sahara Fail: QsaharaServer Fail: Process failHardware Information:
- Model: VOXL 2 (M0154)
- Software was likely VOXL2 SDK 1.40?
- I've accessed VOXL2 QDL Image 14.1a_1.7.8, VOXL2 QDL Image 14.1a_1.1.2, and M0054-2 Starling QDL Image 1.7.4, for their prog_firehose_ddr.elf files and none have worked.
Questions:
Before proceeding with ModalAI's QDL web-based flashing tool (which I understand will wipe the UFS storage), I'm trying to confirm:- Is there a VOXL 2 M0154 specific QDL image that includes the correct prog_firehose_ddr.elf for data recovery?
- Can the modal-qdl CLI or GUI tools be used in a non-destructive way to read partitions, similar to QFIL's "Read Data" function?
- If not, is there any safe way to extract the partitions regarding flight logs before flashing the board back to factory state?
System Setup:
- Host: Windows 11 + Ubuntu (WSL2)
- Device Manager shows: Qualcomm HS-USB QDLoader 9008 (COM 5)
- When attaching the Bus ID from Windows to WSL, lsusb shows: Bus 001 Device 003: ID 05c6:9008 Qualcomm, Inc. Gobi Wireless Modem (QDL mode)
Any help or access to the proper prog_firehose_ddr.elf for M0154 would be greatly appreciated.
My main priority is preserving those flight logs to narrow down what went wrong during a simple arm test.Images:
(This VOXL 2 was from a legacy flight deck)

(QFIL Tool attempts for data recovery)
