Voxl2 GPIO linux control
-
Hello ModalAI Team,
I’m currently trying to test the output of GPIO pin 46 on the VOXL and haven’t seen any voltage change using a multimeter.
Here’s what I’ve tried so far:
echo 1 > /sys/class/gpio/gpio1146/value
echo 0 > /sys/class/gpio/gpio1146/valueI also tried using the VOXL utility commands:
voxl-gpio -w 46 1 and voxl-gpio -w 46 0I have also check that the pin was set output
In all cases, there was no measurable voltage change observed on my multimeter.
Is there something I may be missing in the configuration, or is there an initialization step required for GPIO 46?
Thank you for your help!