Error in VOXL mini 4 in 1 ESC diagram
-
Hi,
I am having strange issues with the VOXL2. I had hooked it up with a 4-in-1 mini ESC using the diagram here: https://docs.modalai.com/images/d0014/CWD-D0014-4-CXX-M22-TX-REV2.jpg. It turns out there is an error on the way wiring is shown (see the red circle):
With that wiring, I was unable to get the LTE v2 pro modem working. It was not being detected. I was also not able to get any battery info.
Now I have fixed the wiring as per the pinout of the connectors. But I am seeing the following issues:
- still I am not able to detect the LTE v2 modem.
- still no battery info. When I try to manually stop/start the "voxl_esc" driver in PX4 mavlink console, it gives me errors and fails to start.
- ADB over usb C does not work if the ESC UART connector J18 is not plugged into the VOXL 2.
Can you help me? I hope nothing is burnt/ broken due to the error in wiring above
-
H h3robotics referenced this topic on
-
Hi,
I am having strange issues with the VOXL2. I had hooked it up with a 4-in-1 mini ESC using the diagram here: https://docs.modalai.com/images/d0014/CWD-D0014-4-CXX-M22-TX-REV2.jpg. It turns out there is an error on the way wiring is shown (see the red circle):
With that wiring, I was unable to get the LTE v2 pro modem working. It was not being detected. I was also not able to get any battery info.
Now I have fixed the wiring as per the pinout of the connectors. But I am seeing the following issues:
- still I am not able to detect the LTE v2 modem.
- still no battery info. When I try to manually stop/start the "voxl_esc" driver in PX4 mavlink console, it gives me errors and fails to start.
- ADB over usb C does not work if the ESC UART connector J18 is not plugged into the VOXL 2.
Can you help me? I hope nothing is burnt/ broken due to the error in wiring above
@h3robotics The diagram has been fixed. Thank you for reporting it.
VOXL 2 - D0014
ModalAI technical documentation for VOXL and VOXL 2 Companion Computers for PX4 and ArduPilot Obstacle Avoidance and GPS-denied navigation, assembled in the USA
ModalAI Technical Docs (docs.modalai.com)
We will continue working on your issue in another thread.
Alex
-
@h3robotics The diagram has been fixed. Thank you for reporting it.
VOXL 2 - D0014
ModalAI technical documentation for VOXL and VOXL 2 Companion Computers for PX4 and ArduPilot Obstacle Avoidance and GPS-denied navigation, assembled in the USA
ModalAI Technical Docs (docs.modalai.com)
We will continue working on your issue in another thread.
Alex
@Alex-Kushleyev the RX and TX lines need to be swapped at the J18 connector as well, please
-
@Alex-Kushleyev the RX and TX lines need to be swapped at the J18 connector as well, please
@h3robotics , Thank you, you are right again. We will update!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login