MSU-M0107 IMX412 I2C address selection
-
Is there an option on the board to change I2C address selection? If so, how can I change it?
@linus777 , unfortunately changing i2c slave address of the camera is not supported by the camera drivers on VOXL2, as the i2c slave address is part of each of the
sensormodulebinaries that contain information for each camera module.Alex
-
@linus777 , unfortunately changing i2c slave address of the camera is not supported by the camera drivers on VOXL2, as the i2c slave address is part of each of the
sensormodulebinaries that contain information for each camera module.Alex
-
@linus777 , the instructions you referenced were made for VOXL1, which had all cameras connected to the same i2c bus and slave address conflicts were not allowed. On VOXL2, each camera port has its own i2c bus and there is no possibility of a conflict when using several cameras with the same i2c slave addresses.
Is your question related to usage on VOXL1 or VOXL2?
Alex
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login