BMM150 Magnetometer on Flight Core V2 EOL
-
The BMM150 magnetometer featured on the Flight Core V2 has reached EOL and is not recommended for new designs. The recommended replacement BMM350 is not a drop-in replacement as it has a different pinout. Will Modal AI be able to produce this board going forward with a redesign to replace the BMM150? Or is this board limited to the current stock because of this?
-
The BMM150 magnetometer featured on the Flight Core V2 has reached EOL and is not recommended for new designs. The recommended replacement BMM350 is not a drop-in replacement as it has a different pinout. Will Modal AI be able to produce this board going forward with a redesign to replace the BMM150? Or is this board limited to the current stock because of this?
Hi @jacobcayetano1
There are still over 500k units in available distribution which we can access.
I would not worry at all at this time and I fully expect we can still build FCv2 as is for years to come.
Our parts sourcing expertise is top notch!
(not sure if you recall but during the parts shortage craziness of 2020-21 we were one of the few vendors who still had product in-stock and shipping!!)
If you had a large order in mind, any head's up is appreciated so we can be sure to have sufficient stock.
Thanks! -
A aspen referenced this topic on
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login