ToF v2 ground level error
-
Hello there!
I've been trying to change the depth sensor from ToF v1 to v2 because it is't supported anymore. And I've connected ToF v2 on voxl2 successfully.
But I have been encountering the critical error about the ground level.
The left red line is showing the pointcloud from the ground. As you can see, the level of ground is higher than the bottom of wall. I think it should be connected with the bottom of wall.
I've tried the same experience with ToF v1 at the same place and time. It's showing the same ground level as I expected.
May I have any comment about it? Thank you! -
-
Any update?
@Gyeongmin-Kim We don't have any great insight at this point. Those sensors are new. It looks like you are seeing some ghosting. You could try different frame rates or exposure times to try and minimize the artifacts
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login