New unit fails UART Loopback test
-
Hi all,
We recently purchased a Voxl Deck (not our first) and our application (which has been running great on other units) wasn't working - specifically we weren't getting anything on the UART line. Sure enough, we ran the included loopback test on UART 12 and it failed - the other ports passed.
Needing only 2 uarts, we moved our application to the other two UART ports... But we find that if one is in use, the other drops out. I assume this is a hardware issue with our unit. Furthermore, we ideally need all three available UART ports for our application so one and a half is a non-starter.
As part of our setup we flash the system image and the issue persists after a re-flash. An identical software setup has worked just fine on multiple other Voxl Decks.
Assuming this to be a hardware defect, we requested a return in private support channel but were instructed to post here instead. Can someone either facilitate a return/replacement or provide other guidance?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login