VOXL ArduPilot SITL
-
I wired TTL-cable from J12 to laptop USB port and start ArduPilot below command:
sim_vehicle.py -v ArduCopter -A "--serial2=uart:/dev/ttyUSB0:921600"
(Also, 57600 and 115200).Connection established with ArduCopter. But voxl-mavlink-server doesn't start. It gives 'PX4 DISCONNECTED FROM UART' error.
When I connect J12 to autopilot TELEM2 port and run voxl, voxl-mavlink-server runnig correctly.
-
I wired TTL-cable from J12 to laptop USB port and start ArduPilot below command:
sim_vehicle.py -v ArduCopter -A "--serial2=uart:/dev/ttyUSB0:921600"
(Also, 57600 and 115200).Connection established with ArduCopter. But voxl-mavlink-server doesn't start. It gives 'PX4 DISCONNECTED FROM UART' error.
When I connect J12 to autopilot TELEM2 port and run voxl, voxl-mavlink-server runnig correctly.
@voxlusername
hi
could u share any doc links or steps needed to set up the SITL
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login