VOXL USB Expansion Board with Fastboot v2 compatibility with VOXL CAM
-
Does the VOXL / VOXL 2 USB Expansion Board with Fastboot v2 work with the VOXL CAM w/ Flight controller? Does it require to remove any part of the housing? I don't see the connector exposed on the back of the housing. We are looking to add a USB to ethernet dongle as a permanent addition to the VOXL CAM so I want to understand if there is any considerations that I need to know about.
-
Does the VOXL / VOXL 2 USB Expansion Board with Fastboot v2 work with the VOXL CAM w/ Flight controller? Does it require to remove any part of the housing? I don't see the connector exposed on the back of the housing. We are looking to add a USB to ethernet dongle as a permanent addition to the VOXL CAM so I want to understand if there is any considerations that I need to know about.
Hi @awagner
Electrically, yes.
Depending on your VoxlCam config, the port may be used by something else.
If you share a photo of your VoxlCam, we can help confirm.
These plug-in boards all use the same 60-pin B2B (J13) on Voxl/VoxlFlight, but if you need to maintain 4G LTE modem or Microhard functionality, that uses the same 60-pin, so you'd have to play swap games back and forth.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login