VOXL2 does not seem to have damage. Looks like it turned on like normal with the replacement part.
M
Mikhail Mayers
@Mikhail Mayers
Posts
-
Request Support: VOXL2 Not Powering up. -
Request Support: VOXL2 Not Powering up.No worries, it happens.
Thank you for the quick turn around. It was working just fine up until it stopped working. I just hope the VOXL2 is ok.
-
Request Support: VOXL2 Not Powering up.Thanks @vinny
Order #8058
-
Request Support: VOXL2 Not Powering up.Hey @vinny
The power module did not did not have a voltage on the 4 pin. I followed the diagram here:
https://docs.modalai.com/voxl2-power/The 12V did have power. The issue could be with the power module? I see no signs of damage on the power module.
Next steps?
-
Request Support: VOXL2 Not Powering up.Hey Vinny,
Sorry, I didn't see that you responded to me so quickly. It's being powered by the shipped wall adapter, nothing fancy. The blue tape on the XT60 is just extra support, no damage or anything like that.
-
Request Support: VOXL2 Not Powering up.Hey all, experiencing an issue.
I had was working with my VOXL2, powered it off for the night. Left the board in same place and in the morning powered it back on without touching anything, but it won't turn on. I'm using the shipped power adaptor and power module. None of the LEDs turn on, totally dead.
If I connect USB only I see a very faint blink from the red LED, I am not able to connect via ADB.
Seems like something was damaged. Any advice for next steps?
-Thanks,
Mikhail