I want to connect a usb 3.0 camera to the usb c port. After connecting, I am unable to see my device when I do lsusb. The camera powers up. I can login using the adb shell. So the usb c is working. I am not sure what settings need to be done to get my usb camera working with usb c.

Hey all on thread, some updates here. Main issue - USB-C as host not working yet on VOXL2: This is my next top priority defect to resolve. I've put a couple days towards it but haven't cracked it yet, but am looking back shortly. Recommended configuration for Boson connection: If you also need two USB ports, then this board (the M0090 carrier board only) which has: a 4 pin JST connector, USB2.0, possible cable is to use is MCBL-00009 or you can make one pretty easily 10 pin JST connector, USB3.0, we are posting a new MCBL-00022 soon which is a 10 pin JST to USB3 (within a week likely) or you can make your own if just 1 USB port, then we have a smaller M0078 USB debug board if just 1 USB port AND you want to add an applications processor UART port on 4pin JST, we will have a new M0125 up online shortly, which I think is pretty cool! Using out of the USBC connector will prevent you from adb access.... so in a vehicle if it's permanently mounted there (and assuming I get the fix!) then you could prevent ability to flash it later on if needed or to troubleshoot, but if that's no issue then I'll update you ASAP when I have updates on this. Which Boson? we tested with the 640 over USB 2.0 and voxl-streamer

ModalAI Forum

Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you have been placed in read-only mode.

Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).

cannot connect usb camera over USB - C adb port

Unsolved VOXL 2 and VOXL 2 Mini

21 Posts 11 Posters 8.9k Views 3 Watching

M Moderator

@msberk It cannot. This is a hardware limitation in VOXL 2 and will not be fixed without a hardware revision.
M Offline
M Offline
msberk
Contributor
wrote on last edited by

#21

@Moderator Thanks for the clarification, we will not expect a solution to this then.
1 Reply Last reply

0

Reading along? Create a free ModalAI Forum account to join in.

With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.

Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.