Spektrum receiver not connecting
-
After setting up a flight core as recommended and upgrading firmware to modalai_fc-v1_default.px4 we connected a Spektrum SPM9745 to port 12 using the supplied MCBL-00005 cable. Using QGround Control we then opened the radio tab, clicked on Spektrum Bind, and selected DSMX-8. We then powered on our DX8e with the bind button pressed. The blinking orange LED changed to constant and the DX8e showed DSMX bound. All this looks OK, but when we press the calibrate button and OK we receive the message "Detected 0 radio channels. To operate PX4, yu need at least 5 channels." We've repeated this process many times with similar results. Can you suggest what is not correct?
-
After setting up a flight core as recommended and upgrading firmware to modalai_fc-v1_default.px4 we connected a Spektrum SPM9745 to port 12 using the supplied MCBL-00005 cable. Using QGround Control we then opened the radio tab, clicked on Spektrum Bind, and selected DSMX-8. We then powered on our DX8e with the bind button pressed. The blinking orange LED changed to constant and the DX8e showed DSMX bound. All this looks OK, but when we press the calibrate button and OK we receive the message "Detected 0 radio channels. To operate PX4, yu need at least 5 channels." We've repeated this process many times with similar results. Can you suggest what is not correct?
@Jimk_Aero Please ignore the previous question. I just needed to reboot the Flight Core and all is OK.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login