Sentinel Receiver/Transmitter Retrofit
-
I have several Sentinels that were shipped with taoglas GPS/mag unit, ghost atto receiver, and orqa controllers with the ghost atto uberlite-24 transmitters. I also have some older sentinels that shipped with a different GPS/mag unit and the spektrum receiver/bind board.
Is there a way I could purchase the GPS/mag units, ghost atto receiver and transmitter/controller and cable assembly to the J19 connector that were used for the last iteration of the Sentinels? I don't even really care about the GPS/mag but I noticed on our newer quads there are wires from the ghost atto receiver board and the gps unit spliced together going into pin 1 of the J19 so I can't just hot swap the spektrum receiver with the ghost atto one.
Reading along? Create a free ModalAI Forum account to join in.
With an account you can reply, ask your own question, get an email when a ModalAI engineer answers, and mark the reply that solved it. Your place in each thread is saved between visits.
Questions about VOXL, Flight Core, ESCs and ModalAI drones are answered here by the engineers who build them.
Register Login