Remote ID over Wifi
-
What is the status of
voxl-remote-id?It seems like the current version may be bugged according to this post.
I am using a Starling 2 Max (SKU below) and would be interested in broadcasting RID while being connected to another WiFI network i.e. not in SoftAP mode. As far as I can understand from the remote-id docs page this is not possible as the RID is broadcast over the wifi signal. Is that understanding correct?
family code: MRB-D0012 (starling-2-max) compute board: 4 (voxl2) hw version: 2 cam config: 29 modem config: 24 (M0090-3-2 Sierra EM9291)) tx config: 9 (ghost) extras config: 0 (none) SKU: MRB-D0012-4-V2-C29-T9-M24-X0Note that if I even try running
voxl-remote-idI get the following error:voxl2:/$ voxl-remote-id INFO: Remote ID SN: 1814C1425399169 ERROR: in json_read_file, file is missing: /etc/modalai/voxl-remote-id.conf ERROR: object missing self_id_message ERROR: Could not read in self ID string ERROR: Could not read from config file ERROR: Failed to fill uas dataKind regards,
Griffin
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login