System Lights - VOXL2
-
Hey,
I'm currently using SDK release 1.1.1 on my VOXL2 board. I had connected and removed all sensors, but I find DS2 Light constantly ON. Generally I see the light, only when the system is in bootloop state or the system hasn't booted due to improper image sensor module placement on interposers. During normal system boot, the DS2 green light boots and power off, blinking few times.
Currently, I have removed all the image sensors and interposers from the board. But the DS2 light is still constantly powered ON. Is there anything I could do?
-
Hey,
I'm currently using SDK release 1.1.1 on my VOXL2 board. I had connected and removed all sensors, but I find DS2 Light constantly ON. Generally I see the light, only when the system is in bootloop state or the system hasn't booted due to improper image sensor module placement on interposers. During normal system boot, the DS2 green light boots and power off, blinking few times.
Currently, I have removed all the image sensors and interposers from the board. But the DS2 light is still constantly powered ON. Is there anything I could do?
@Jetson-Nano Image of the board I'm using,
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login