Failure to open port during ESC Calibration of VOXL Flight
-
I am attempting to calibrate ESCs using the procedure outlined here: Flight Core PWM ESC Calibration.
The procedure fails with the following text:
Using portname /dev/serial/by-id/usb-ModalAI_PX4_FMU_ModalAI_FCv1_0-if00
connecting...
Error: Unable to open portI have mostly been running it with a USB connection, but the UDP method failed similarly.
I have also tried to do it through QGroundControl, but to my understanding, since FCv1 did not support power through USB, it is not possible to use the QGroundControl calibration on the VOXL Flight/FCv1.
Thanks in advance.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login