Bootup after running install.sh script out of fastboot not working
-
So basically the voxl was bricked and I put it into fastboot with the add-on board. Now I wanted to flash the software onto it. After running the script with the -f Flag it is stuck waiting for device. So basically after flashing it goes straight back into the bricked state.
Here is the log:sudo ./install.sh -f [INFO] adb installed [INFO] fastboot installed [INFO] Factory Mode [INFO] Using factory mode [INFO] Rebooting into fastboot... error: no devices/emulators found target reported max download size of 536870912 bytes sending 'aboot' (494 KB)... OKAY [ 0.037s] writing 'aboot'... OKAY [ 0.036s] finished. total time: 0.073s target reported max download size of 536870912 bytes sending 'boot' (56066 KB)... OKAY [ 0.379s] writing 'boot'... OKAY [ 0.450s] finished. total time: 0.829s target reported max download size of 536870912 bytes erasing 'system'... OKAY [ 0.008s] sending sparse 'system' 1/3 (523027 KB)... OKAY [ 4.245s] writing 'system' 1/3... OKAY [ 17.553s] sending sparse 'system' 2/3 (523094 KB)... OKAY [ 3.654s] writing 'system' 2/3... OKAY [ 13.533s] sending sparse 'system' 3/3 (521982 KB)... OKAY [ 4.312s] writing 'system' 3/3... OKAY [ 16.147s] finished. total time: 59.452s target reported max download size of 536870912 bytes erasing 'userdata'... OKAY [ 0.023s] sending 'userdata' (138395 KB)... OKAY [ 0.889s] writing 'userdata'... OKAY [ 1.124s] finished. total time: 2.036s target reported max download size of 536870912 bytes sending 'persist' (4292 KB)... OKAY [ 0.057s] writing 'persist'... OKAY [ 0.072s] finished. total time: 0.129s target reported max download size of 536870912 bytes erasing 'cache'... OKAY [ 0.021s] sending 'cache' (5152 KB)... OKAY [ 0.056s] writing 'cache'... OKAY [ 0.095s] finished. total time: 0.173s target reported max download size of 536870912 bytes sending 'recoveryfs' (126585 KB)... OKAY [ 0.771s] writing 'recoveryfs'... OKAY [ 6.139s] finished. total time: 6.910s [INFO] Done flashing all images. Rebooting device in 2 seconds rebooting... finished. total time: 0.824s [INFO] Waiting for device... -
Hello Arrowtec, was the fastboot switch turned off after ~5 seconds & then immediately launching into the install script with factory install? It does take a couple of seconds for the device to reboot to then install voxl-suite. However, if it lingers there, you may have to power cycle & restart the process again.
We have this page to follow: https://docs.modalai.com/unbrick-voxl/
With a video coming soon. -
I tried everything there was in the tutorial and spent like 1h with different timing. I was able to unbrick other Voxls before but this one doesn't want to. If there is a different method than what you already described please let me know.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login